New Construction Drywall Installation in Dallas, TX | Full-Home & Commercial Hanging
Dallas Premier Drywall provides new construction drywall installation for residential and commercial projects throughout Dallas, TX, where steady growth in single-family homes, multifamily developments, and commercial buildouts keeps demand high for crews who can hang and finish drywall on schedule. Projects across North Texas often call for a mix of standard and specialty assemblies in the same building, from fire-rated partitions between units to moisture-resistant board in bathrooms and acoustic assemblies in shared-wall construction.
Our process moves from hanging walls and ceilings, including vaulted and sloped ceiling installation, through taping, mudding, and finishing to the specified level, followed by texture application and architectural details like soffits, bulkheads, and curved walls where the design calls for them. We also install gypsum shaftwall systems and other code-driven assemblies that require precise, tested construction methods. Whether the project is a custom home or a multifamily or commercial build, we coordinate with general contractors and other trades to keep drywall on pace with the rest of construction.
Get a FREE Quote
Our Drywall Installations for New Constructions
Drywall Hanging for Walls and Ceilings
Every new build or buildout starts with drywall hanging for walls and ceilings, the stage that sets up a straight, solid surface for everything finished afterward. We handle interior wall hanging and interior partition hanging alongside flat ceiling, high ceiling, sloped ceiling, and vaulted ceiling installation, screwing board to framing, wall furring, ceiling furring, or chase wall assemblies, and applying double-layer or multi-layer installation where fire or sound requirements call for it. For pre-rock stages, we hang board ahead of other trades' inspections so the project stays on schedule. Properly hung board, with consistent screw spacing and tight seams, gives every following step a stable base to build on.
Fire-Rated Drywall Installation
Certain walls and ceilings in new construction carry a code-required fire rating, which is where fire-rated drywall installation comes in. We hang Type X board and Type C board according to the assembly's specified layer count and fastener pattern, building fire-rated partition and fire-rated ceiling systems, along with area-separation wall and garage separation assemblies where a rated barrier is required between units or spaces. Getting fastener spacing, joint treatment, and layer orientation right matters here, since an assembly only performs to its rating when installed exactly as specified. Installed correctly, these assemblies meet code requirements and help protect occupants and structure in the event of a fire.
Gypsum Shaftwall Installation
Vertical shafts running through a multi-story building need a wall system built for both fire resistance and one-sided installation, which is the role of gypsum shaftwall installation. We install gypsum shaftliner panels set into CH-studs from the corridor side, building elevator shaft enclosure, stairwell shaftwall, service shaft enclosure, and fire-rated corridor ceiling shaftwall assemblies according to their tested design. This one-sided installation method lets us complete the wall without access from inside the shaft, which keeps the work efficient on active job sites. Properly installed, these assemblies maintain their fire rating along the full height of the shaft, supporting both code compliance and the building's overall safety.
Specialty Performance Drywall Installation
Not every wall in a new building can be standard board, which is where specialty performance drywall installation covers the spaces that need a specific functional rating. We install soundproof board and sound-rated partition and acoustic ceiling assemblies to meet an STC-rated assembly target, moisture-resistant board and mold-resistant board or fiberglass-faced gypsum panel in bathrooms and damp areas, abuse-resistant board, abrasion-resistant board, impact-resistant board, and high-impact gypsum board in high-traffic spaces, and lead-lined board in medical imaging rooms requiring radiation shielding. Each board type has its own handling, cutting, and fastening requirements that differ from standard gypsum. Specifying and installing the right product for each space keeps the building performing as designed long after construction is complete.
Drywall Taping, Finishing, and Texturing
Once board is hung, drywall taping, finishing, and texturing takes a building from raw construction to a surface ready for paint. We handle taping, mudding, and sanding across every seam and butt-joint finishing, interior-angle finishing, and fastener finishing point, building up from Level 1 finish and fire taping or Level 2 finish in concealed areas to Level 4 finish or Level 5 finish and full-surface skim coating for smooth wall finish, smooth ceiling finish, and critical-lighting finish applications. We apply spray texturing or hand-applied texturing in orange peel, spatter, knockdown, skip trowel, slap brush, stomp, swirl, or custom texture patterns depending on the design spec. Matching the right finish level and texture to each space's lighting and use keeps the final surface looking intentional and consistent throughout the building.
Architectural Drywall Installation
Beyond flat walls and ceilings, many new builds call for architectural drywall installation to bring a design's custom shapes and details to life. We build curved wall and curved ceiling assemblies, barrel vault and arch construction, and recessed niche, soffit, bulkhead, and curved soffit details, along with tray ceiling, coffered ceiling, column enclosure, and beam enclosure work that goes beyond standard framing and hanging techniques. Architectural reveal and shadow-gap trim installation add clean, defined lines where a design calls for a modern, seamless transition between surfaces. These details require closer attention to layout and fastening than flat drywall work, and done well, they give a space the architectural character the design was built around.
Our New Construction Drywall Installation Process
Step 1:
Board Hanging and Layout
We hang standard, Type X fire-rated, moisture-resistant, acoustic, or impact-resistant gypsum board to framing with screws spaced according to the assembly's fastening schedule, orienting panels horizontally or vertically based on wall height and layout. Ceilings, including flat, sloped, and vaulted configurations, are hung first where access allows, and double-layer or multi-layer assemblies are staggered to meet fire or sound-rating requirements before any taping begins.
Step 2:
Taping, Mudding, and Multi-Coat Finishing
Once board is hung, we tape every seam, butt-joint, and interior angle, embedding paper or fiberglass tape in a base coat of joint compound before building up fill and finish coats with progressively wider taping knives. We finish each space to its specified level, from Level 1 fire taping in concealed areas up through Level 4 or Level 5 with full-surface skim coating, sanding between coats to keep the surface flat and ready for the next stage.
Step 3:
Texture Application and Architectural Detailing
We apply spray or hand-applied texture, such as orange peel, knockdown, or skip trowel, matched to the project's design specification, and complete architectural elements like soffits, bulkheads, curved walls, and reveals using the same framing and finishing methods as standard drywall. A final walkthrough under direct lighting confirms finish quality and texture consistency across the space before the area is turned over for priming and paint.
How Much Does New Construction
Drywall Installation Cost?
New construction drywall installation typically costs $1.50 to $3.75 per square foot, fully hung, taped, and finished to a Level 4 standard. For a full single-family home, that usually works out to $8,000 to $30,000 depending on square footage, while a single room or addition can run from a few hundred to a few thousand dollars.
Several factors move that price up or down. Finish level is one of the biggest drivers: a basic Level 1 fire-taping finish in a concealed area costs less than a Level 4 finish used throughout most homes, and a Level 5 skim coat for critical lighting or non-flat paint adds more labor still. Assembly type also matters, since fire-rated, acoustic, moisture-resistant, or impact-resistant board costs more in both materials and labor than standard gypsum, and projects requiring gypsum shaftwall systems or architectural details like curved walls, soffits, or coffered ceilings take considerably more time than flat wall and ceiling installation. Ceiling height and layout complexity add cost as well, since vaulted ceilings and rooms with many corners or openings slow down both hanging and finishing.
These factors connect directly to scope. A straightforward single-family home with standard board and a Level 4 finish throughout is a more predictable, lower-cost project than a custom home or commercial buildout involving fire-rated partitions, acoustic assemblies, and architectural ceiling details. Dallas Premier Drywall provides a project-specific estimate based on square footage, specified board types, finish level, and architectural scope, since per-square-foot averages alone don’t capture what a given new construction project actually requires.
Factor | How It Affects Cost |
|---|---|
Finish level (Level 1 to Level 5) | Higher levels require more coats, skim coating, and labor |
Board type (standard, fire-rated, acoustic, moisture-resistant, impact-resistant) | Specialty board costs more in materials and installation time |
Square footage and layout complexity | More wall and ceiling area, corners, and openings increase labor |
Ceiling height and type (flat, sloped, vaulted) | Taller or sloped ceilings require more time and equipment |
Gypsum shaftwall or fire-rated assemblies | Tested assemblies require precise installation methods, adding cost |
Architectural details (soffits, curves, coffered ceilings) | Custom shapes take more time to frame and finish than flat surfaces |
Texture type and application method | Hand-applied textures generally cost more than spray-applied finishes |
Project setting (residential vs. commercial/multifamily) | Commercial projects may involve code requirements and trade coordination |
Why Choose Dallas Premier Drywall for New Construction Installation in Dallas, TX?
Experience Across Standard and Specialty Assemblies
With over 20 years of local experience, we install fire-rated, acoustic, moisture-resistant, and impact-resistant board correctly to code, along with shaftwall systems and architectural details most crews don't handle in-house.
Registered, Insured, and Safety-Certified
We hold an active City of Dallas contractor registration, carry general liability insurance and workers' compensation, and our crews are OSHA-trained, keeping job sites safe and inspections on track.
Reliable Coordination with General Contractors
We work directly with builders and other trades to keep drywall on schedule across residential, multifamily, and commercial projects, with clear communication from hanging through final finish.
New Construction Drywall Installation FAQs
How long does drywall installation take for a new home?
A standard single-family home typically takes one to three weeks for hanging, taping, and finishing, depending on square footage and finish level. Larger or multifamily projects take longer and are often phased alongside other trades.
Do you coordinate with my general contractor or builder?
Yes, Dallas Premier Drywall works directly with general contractors to schedule drywall work around framing, electrical, and plumbing rough-in, keeping the project on track.
What finish level do I need for my new home?
Most homes use a Level 4 finish for standard walls and ceilings, while areas with critical lighting or non-flat paint often call for a Level 5 skim coat. We can recommend the right level based on your space and finish.
Can you install fire-rated or soundproof drywall where it's required?
Yes, we install Type X and Type C fire-rated assemblies, sound-rated partitions, and other code-driven assemblies according to their tested specifications.
Do you handle architectural details like curved walls or coffered ceilings?
Yes, we build soffits, bulkheads, tray and coffered ceilings, curved walls, and other architectural drywall details as part of new construction projects.
Will my new drywall match the texture used throughout the rest of the project?
Yes, Dallas Premier Drywall applies consistent texture across the entire project, whether spray-applied or hand-applied, so every space matches the specified design.